The garbage disposal is an incredibly important system, yet it can be easy to inadvertently damage. However, there are some simple rules that you can follow to dramatically reduce the chances of accidentally breaking your disposal system. Here are some of the simpler rules to help you get started:
One of the most important, yet least obvious, keys to maintaining the health of your garbage disposal is to make sure that you are running the water when you turn on the garbage disposal. The flow of water will clear out all kinds of materials that build up in the disposal, both before and during the grinding process.
Even after you have finished grinding up whatever is in the disposal, you want to keep running the water, since that will remove all of the freshly ground waste. If you fail to do so, then that waste can cling to the blades, wearing them down and clogging up the system.
Use Cold Water
You want to make sure that you use cold water when you are grinding specific things, such as fats. In general, many types of organic waste can change from a solid to a goo when subjected to hot water. In turn, this makes it a lot harder for your garbage disposal to actually do its job, since the waste will get stuck to the blades, rather than quickly flushed down the drain.
Watch What You Grind
You also want to be very careful about exactly what you are putting in your disposal. A good starting point is that recyclables should not be put in the garbage disposal. Glass, paper, and plastic will all cause serious wear and tear on your system, while simultaneously contributing to the buildup of trash in sewers. Not only are you breaking your own disposal by flushing these substances, but you are also contributing to serious global issues.
However, this problem is not limited to recyclables. Foods with a lot of fiber can cause some of the same problems, so you want to think twice before throwing corn husks into the disposal.
Don't Use Harmful Chemicals
Bleach and drain cleaners may seem like a good idea, but they can seriously damage the blades of your disposal. They may clean out clogs, but you can likely remove those clogs yourself, either by plunging the sink or using much safer mixtures, like baking soda and vinegar. Contact a company like Abbey Plumbing & Heating Co for more information.